FREE SHIPPING ON ORDERS OF $75 OR MORE
Flexabed Compared: Hi-Low SL vs Premier vs Value-Flex
Last reviewed November 2026. Specifications are taken from Flexabed's own Product Guide and model documentation. Prices shown are manufacturer minimum advertised price and are the same at every authorized dealer.
Key Takeaways
- All three Flexabeds are hand-built to order in LaFayette, Georgia, run on whisper-quiet Linak motors, adjust the head and foot independently, and carry a Limited Lifetime Warranty. The differences are height, mattress choice and remote features.
- Value-Flex from $1,515 is the entry model: innerspring mattress only, wired remote only, no massage or lighting options.
- Premier from $1,905 opens up the full mattress range, a wireless remote, and the optional extras — massage, under-bed lighting, voice control and wireless phone charging. It also comes in the most sizes, including King and California King.
- Hi-Low SL from $3,045 is the only model whose whole deck raises and lowers under power. That is the medical feature, and it is the reason this bed replaces a hospital bed.
- Bottom line: if the person in the bed can stand up on their own, the Premier does everything they need and costs less. If getting in and out of bed is the problem — or a caregiver works at the bedside — the Hi-Low SL is the only one of the three that solves it.
At a Glance
| Value-Flex | Premier | Hi-Low SL | |
| Price from | $1,515 | $1,905 | $3,045 |
| Powered height adjustment | No | No | Yes |
| Head & foot adjustment | Yes | Yes | Yes |
| Mattress choices | Innerspring only (soft, medium, firm) |
Full range | Seven constructions |
| Remote | Wired, one-touch | Wired or wireless | Wired or wireless |
| Massage option | No | Yes | Yes |
| Under-bed lighting | No | Optional | Optional |
| Voice control & phone charging | No | Optional | Optional |
| Weight capacity, one person | 300 lbs (400 reinforced) |
300 lbs (400 reinforced) |
400 lbs |
| Weight capacity, two people | 500 lbs (700 reinforced) |
500 lbs (700 reinforced) |
700 lbs |
| Sizes | Twin, Full, Queen, Dual Queen, Dual King |
Twin, Full, Queen, Dual Queen, King, Dual King, California King |
Twin, Full, Queen, Dual King |
| Lengths | 74", 80", 84" | 74", 80", 84" | 74", 80", 84" |
| Warranty | Limited Lifetime | Limited Lifetime | Limited Lifetime |
Sizes are per Flexabed's Product Guide model comparison. Flexabed's guide lists head articulation to 73 degrees and foot articulation to 40 degrees without separating the figures by model, so treat those as the range across the line rather than a per-model specification. Call us and we will confirm against the current spec sheet for the configuration you are considering.
How Low the Hi-Low SL Actually Goes
This is the table most dealers do not publish, and it is the whole reason to buy a Hi-Low SL. Heights are floor to the top of the bed, from Flexabed's Product Guide. "Leg pads" means the locking casters have been removed and replaced with pads, which lowers any Flexabed by 2.25 inches.
| With leg pads | With casters | |
| Fully lowered, foundation only | 11" | 13.25" |
| Fully lowered, low profile mattress | 16.5" | 18.75" |
| Fully lowered, quilted top mattress | 20 5/8" | 22 7/8" |
| Fully lowered, gel mattress | 21" | 23.25" |
| Fully raised, foundation only | 18.5" | 20.75" |
| Fully raised, low profile mattress | 24" | 26.25" |
| Fully raised, quilted top mattress | 28 1/8" | 30 3/8" |
| Fully raised, gel mattress | 28.5" | 30.75" |
How to read this. The travel is 7.5 inches whichever mattress you choose — the mattress decides where that 7.5 inches sits. If the goal is to get both feet flat on the floor before standing, pair the Hi-Low SL with a low profile mattress on leg pads and the bed drops to 16.5 inches. That is lower than most hospital beds and about the seat height of a dining chair. If the goal is a bed that looks like furniture and rises high enough for a caregiver to work without bending, the quilted top on casters gives you 22 7/8 to 30 3/8 inches, and optional leg extensions take the top of that range to about 37 3/8 inches.
Mattress measurements carry a tolerance of plus or minus a quarter inch. Measure your own room, doorway and the turn into it before ordering.
Flexabed Value-Flex
From $1,515. Flexabed's entry model. You get the frame, the motors and the warranty — and that is deliberately where it stops.
What you get: independent head and foot adjustment, one-touch wired remote, whisper-quiet Linak motors, locking casters, headboard mounting brackets, a 2-inch Advantech foundation, and an innerspring mattress in soft, medium or firm. Optional side half-rails, frame reinforcement, leg extensions and battery backup.
What you give up: mattress choice is innerspring only. The remote is wired, and because the extras run through the wireless remote, that rules out massage, under-bed lighting, voice control and phone charging entirely — not as unselected options, but as things this frame cannot take.
Best for: someone who wants the therapeutic positioning and the Flexabed build at the lowest entry price, in a room where the bed does not need to do anything clever.
See Value-Flex sizes and current pricing →
Flexabed Premier
From $1,905. Three hundred and ninety dollars above the Value-Flex, and it is the step that unlocks almost everything except height.
What you get: everything in the Value-Flex, plus your choice of wired or wireless remote, the full Flexabed mattress range — innerspring soft, medium or firm, low profile, memory foam, gel memory foam, latex, and innerspring with memory foam combination — a mattress retainer cover, and a backup battery that flattens the bed once in a power cut. With the wireless remote you can add dual-timed massage, motion-activated under-bed lighting, Bluetooth, and voice control with a wireless charging puck.
It also comes in the most sizes. Flexabed's Product Guide lists the Premier in Twin, Full, Queen, Dual Queen, King, Dual King and California King. The Hi-Low SL does not come in King or California King, so if you need a full-width King, the Premier is the only Flexabed that offers it outright.
What you give up: the deck height is fixed. Standard height is listed at 22 inches, dropping to around 21 inches with the casters removed, and leg extensions raise it 2 to 7 inches in 1-inch steps. What it will not do is move under power, so it cannot be lowered for someone at risk of falling or raised for a caregiver mid-task.
Best for: a couple or an individual who wants an adjustable bed that looks like bedroom furniture, with a mattress chosen for their own back rather than whatever came with the frame.
See Premier sizes and current pricing →
Flexabed Hi-Low SL
From $3,045. The only Flexabed whose whole deck travels up and down at the touch of a button, through 7.5 inches of powered range.
What you get: everything the Premier does, plus motorised height. Weight capacity steps up to 400 lbs for one person or 700 lbs across a Dual King, with no single occupant over 400 lbs. Seven mattress constructions. An emergency lowering button on the control box so the bed can be flattened and dropped in a power cut or if the remote fails. Pre-installed mounting plates for side rails at head and foot. Optional leg extensions, Bluetooth, voice control, massage, under-bed lighting and battery backup.
One detail worth planning around: as the Hi-Low SL rises it also travels about 7.5 inches horizontally toward the foot of the bed. It is not a problem, but it is worth knowing before you position the bed hard against a footboard wall.
It can also be paired. Flexabed will pair a Hi-Low SL twin with a Premier or Value-Flex twin to make a Dual King, so only the side that needs height adjustment pays for it. If one of you needs a hi-low and the other just wants a comfortable adjustable bed, call us — that configuration costs meaningfully less than two Hi-Low SL bases.
What you give up: price, and King or California King width. If you need extra height rather than less, leg extensions are available and raise the bed in 1-inch steps, taking the fully raised height with a quilted top mattress on casters to about 37 3/8 inches.
Best for: anyone whose difficulty is getting into and out of bed rather than lying in it. Anyone who has fallen or might. Any household where someone else helps with transfers, dressing or wound care at the bedside.
See Hi-Low SL sizes and current pricing →
Which One Should You Choose?
Budget is the obvious way to decide and it is usually the wrong one. The better question is what actually goes wrong at the bedside.
- They get in and out of bed without help. Premier. Spend the difference on the right mattress, not on height you will never use.
- Standing up from the bed is the hard part. Hi-Low SL with a low profile mattress. Dropping to 16.5 inches means feet flat on the floor before any weight goes through the knees.
- They have fallen out of bed, or you worry they will. Hi-Low SL, lowered. A shorter fall is a smaller injury, every time.
- Someone helps them at the bedside most days. Hi-Low SL. Raising the deck is what protects the helper's back over years, and it is the single most common reason families upgrade later and pay twice.
- A patient lift is in use or likely. Hi-Low SL. The vertical range is what lets a lift get under and over the frame.
- Two people share the bed and only one needs height. A paired Dual King — one Hi-Low SL twin with a Premier twin. Call us to configure it.
- You need a true King or California King. Premier. The Hi-Low SL is not made in those widths.
- Budget is genuinely fixed and the bed is for comfort rather than care. Value-Flex. Just know that massage, lighting and voice control are off the table for good, not for now.
If you are between two of them, call us before you order. Every Flexabed is built to your specification after you buy, which makes it a poor thing to guess at. Ten minutes on the phone is cheaper for both of us than the wrong frame.
Mattress Options, Compared
The mattress decides how the bed feels and how high it sits. Flexabed builds all of them to flex with the base, which an ordinary mattress will not do well.
| Mattress | Height to taped edge | Value-Flex | Premier | Hi-Low SL |
| Innerspring, soft / medium / firm | 8.75" | Yes | Yes | Yes |
| Low profile foam | 4.25" | No | Yes | Yes |
| Innerspring with memory foam | 8.75" | No | Yes | Yes |
| Memory foam visco core | 8.75" | No | Yes | Yes |
| Gel memory foam | 8.75" | No | Yes | Yes |
| Latex foam | 8.75" | No | Yes | Yes |
The low profile mattress is a care decision, not a comfort one. At 4.25 inches to the taped edge instead of 8.75, it takes four and a half inches off the top of the bed — which is how a Hi-Low SL reaches 16.5 inches. If transfer height is the problem you are solving, choose the low profile first and work backwards.
Mattresses may be exchanged for a different type within 30 days in new condition, with shipping fees applying. The frame itself is built to order and is not returnable except for a manufacturer defect, incorrect fulfilment, or a warranty claim.
Sizes and Lengths
Every model comes in 74", 80" standard and 84" lengths. Widths differ:
- Twin 38" and Full 53" — all three models.
- Queen 60" — all three models.
- Dual Queen, two 30" bases — Value-Flex and Premier.
- Dual King, two 38" bases — all three models, and the configuration that allows a paired Hi-Low SL and Premier.
- King and California King — Premier only.
80" suits most people up to about 6'2"; 84" adds four inches for taller users. Custom sizes are available from Flexabed at additional cost and are not returnable.
One thing worth saying plainly: side rails ordered with a Dual Queen cannot be fitted by the delivery and setup team. They come with mounting brackets and instructions for you to install, and we will talk you through it.
Delivery, Build Time and Warranty
- Flexabeds ship free with free threshold delivery, which means the bed is brought just inside the entrance to your home or garage.
- Build time is about 3 business days, because the bed does not exist until you order it. Threshold delivery usually completes within 7 to 10 business days of your order.
- In-home setup is an upgrade. If you want the bed carried in, assembled and the packaging taken away, choose one of the Bed Setup options at checkout — usually 10 to 12 business days.
- Western states — California, Washington, Nevada, Idaho, Montana, Wyoming, the Dakotas, Utah, Colorado, Arizona and New Mexico — add 2 to 3 business days.
- Elevators need measuring in advance. Limited-access elevators may need an additional service fee, and we would rather find that out before the truck arrives than after.
- Warranty is Limited Lifetime across the Flexabed line, confirmed in Flexabed's own operations manual and Product Guide.
Frequently Asked Questions
What is the difference between the Flexabed Premier and the Hi-Low SL?
Both adjust the head and foot independently. Only the Hi-Low SL raises and lowers the entire deck under power, through about 7.5 inches of travel. That single difference is why the Hi-Low SL is used as a hospital bed alternative and the Premier is not.
How low does the Flexabed Hi-Low go?
Per Flexabed's Product Guide, 16.5 inches from the floor to the top of the bed with a low profile mattress and leg pads fitted, or 11 inches as a bare foundation. With the standard quilted top mattress on casters the range is 22 7/8 to 30 3/8 inches.
Can the Hi-Low SL be raised higher than 30 inches?
Yes. Leg extensions are available and raise the frame in 1-inch steps, which takes the fully raised height with a quilted top mattress on casters to roughly 37 3/8 inches. That is usually asked for by caregivers who want to work standing upright, or by very tall users. Tell us the working height you need and we will specify the extensions with the order.
Is the Value-Flex worth saving money on?
It depends entirely on whether you will miss the mattress choice. The frame, motors and warranty are the same family. But the Value-Flex takes an innerspring mattress only and a wired remote only, and the wired remote is what locks out massage, lighting and voice control permanently. For $390 more the Premier removes every one of those limits.
What weight can a Flexabed hold?
The Hi-Low SL is rated to 400 lbs for a single occupant, or 700 lbs for a Dual King with no one person over 400 lbs. The Premier and Value-Flex are rated to 300 lbs single and 500 lbs dual as standard, and both can be ordered with frame reinforcement that takes those to 400 and 700. Reinforcement has to be specified when you order and is not available on Dual Queen beds.
Are Flexabeds made in the USA?
Yes. Every Flexabed is hand-built to order in LaFayette, Georgia. The company has been doing it since 1969.
Can I use my own mattress?
Only if it is rated for an adjustable base, and Flexabed recommends against it. An ordinary mattress resists bending, which puts load on the motors and gives you a worse result in every position.
Can one side of a King have height adjustment and the other not?
Yes. Flexabed will pair a Hi-Low SL twin with a Premier or Value-Flex twin as a Dual King. Call us and we will price that configuration, which usually costs considerably less than two Hi-Low SL bases.
Will Medicare or insurance cover it?
Sometimes, and it depends on your policy and documented medical need. Adjustable beds can qualify as durable medical equipment when prescribed. NewLeaf is private-pay and does not bill insurance, so you would be seeking reimbursement from your own insurer. Ask them before you order, not after.
Can I return it if I pick the wrong model?
The frame is built to your specification after you order, so it is not returnable except for a manufacturer defect, incorrect fulfilment or a warranty claim. Mattresses can be exchanged for another type within 30 days in new condition, with shipping fees. This is the reason we would genuinely rather you called first.
Why is the price identical everywhere I look?
Flexabed sets a minimum advertised price, so every authorized dealer shows the same figure. What differs between dealers is who helps you choose the frame, what delivery options they offer, and who picks up the phone a year later when you need a remote or a caster.
Talk to Someone Before You Order
NewLeaf Home Medical is a small, family-run business and an authorized Flexabed dealer. We are always happy to help on the phone — there is no call centre and no script. Tell us who is using the bed, who helps them, and what the room looks like, and we can usually tell you which model and which mattress in a few minutes.
Browse all Flexabed models, mattresses and parts → · Compare Flexabed against other home hospital bed brands →