FREE SHIPPING ON ORDERS OF $75 OR MORE
Prius Ai1 Expandable Bariatric Bed: Full Specifications and Who It Fits
Last reviewed November 2026. Every specification on this page is taken from Prius Healthcare USA's own Ai1 brochure and user manual, not from third-party listings. Where dealer listings and the manufacturer disagree, we have said so.
Key Takeaways
- The Ai1 is the only bed in our catalogue that expands in both width and length: 35" to 42" to 48" wide, and 80" to 84" to 88" long, on the same frame, after it is in the room.
- It drops to 10 inches and rises to 31 inches, so it covers fall prevention and caregiver working height in one bed.
- It has an in-bed scale, a 3-zone bed exit alarm, 14° Trendelenburg and reverse Trendelenburg, one-push CPR and a cardiac chair position.
- On weight capacity, read carefully. Most listings advertise "600 lb capacity." Prius's own documents give 550 lbs maximum patient weight and 600 lbs safe working load. The safe working load includes the mattress, bedding and any equipment on the bed, not just the person. If the person using the bed is over 550 lbs, this is not the right bed, whatever a listing says.
- Bottom line: if you need one bed to fit a body that is wide, or tall, or both, and you want a weight read without a transfer, there is very little else on the market that does it. If you only need a wide bed, there are cheaper ways to get one.
Full Specifications
From the Prius Ai1 brochure and user manual.
| Expandable width | 35" → 42" → 48" |
| Expandable length | 80" → 84" → 88" |
| Deck height range | 10" to 31" |
| Maximum patient weight | 550 lbs |
| Safe working load | 600 lbs (patient + mattress + bedding + equipment) |
| Head section | 0–70° |
| Knee / foot section | 0–35° |
| Trendelenburg | 14° Trendelenburg and 14° reverse |
| Overall frame | 89.7" L x 39.7" W x 10" H |
| Mattress sizes it takes | 36" to 48" wide, 80" to 88" long, 6" suggested height |
| Casters | 5", central lock and steer |
| Power | 120 VAC, 60 Hz, 5.0 A, Class I Type B |
| Duty cycle | 2 minutes on, 18 minutes off |
| Warranty | 1 year bed, 10 years steel structure, 90 days wear parts including batteries |
One figure the manufacturer prints two ways: the features list gives a 10" low height while the mechanical specifications give a maximum support surface height of 31.5" rather than 31". We quote 10" to 31" because that is the range on the brochure. Call us and we will confirm against the current spec sheet for the configuration you are ordering.
What "Expandable" Actually Means Here
Plenty of beds are sold as bariatric because they are built wide. The Ai1 is different: one frame changes size. The support platform sections widen from a 35" base out to 42" and then 48", and the deck extends from 80" to 84" and 88".
Why that matters in practice:
- You do not have to predict the future. Weight changes. If someone is losing weight after surgery, or gaining it, the same bed still fits.
- It gets through the door. A 48" fixed-width bariatric bed has to be carried in at 48" wide. The Ai1 goes in at 35" and opens up once it is in the bedroom.
- Tall and wide are separate problems. At 88" the sleep deck suits someone around 6'8", independently of width. Most beds make you choose.
- One bed, two people. If care is handed between family members, or the bed outlives the first user, it adapts rather than being replaced.
Expanding the deck to 84" or 88" needs a matching mattress length. We supply bolster extenders so your mattress grows with the frame instead of leaving a gap at the foot.
The In-Bed Scale
The Ai1 weighs the person in the bed. That sounds like a convenience and is actually the opposite. For anyone who cannot stand on a scale safely, a weight reading normally means a transfer, a hoist, or no reading at all.
Daily weight is how fluid retention gets caught in heart failure, how nutrition is tracked during recovery, and how a doctor decides a medication dose. The manual describes the scale as monitoring and recording both weight and weight change, which is the number that actually matters clinically.
Prius does not publish a scale accuracy figure in the manual, and we would rather tell you that than invent one. If accuracy to a specific tolerance matters for a care plan, call us and we will get it from Prius in writing before you order.
Low Height, Fall Prevention and Caregiver Access
The 10" to 31" range is doing two different jobs.
At 10 inches the deck is lower than most home hospital beds. If someone rolls out, it is a short fall onto the floor rather than a drop from mattress height. Combined with the 3-zone bed exit alarm, it is a genuine fall-management setup rather than a bed that merely happens to go low.
At 31 inches a caregiver can do wound care, dressing or changing without bending over the mattress for an hour. That is the part families underestimate, and the reason people upgrade later and pay twice.
The bed also has Safety Stop technology that halts descent if something is underneath it, under-bed lighting, an on-board backup battery, nurse call wiring, in-rail patient controls, a patient handset, footboard controls and one-push CPR release. A Gravity Assist mode limits the head-down angle to 4° by default at startup, so Trendelenburg cannot be applied accidentally at full travel.
Choosing the Mattress
This is the decision that changes the price most, and the one most worth getting right. A bariatric patient with limited mobility is a pressure-injury risk by definition, and the frame does nothing about skin.
| Mattress | Therapy | Choose it when |
| Prius VLX foam | Pressure redistribution, no power | Low to moderate risk, or no skin breakdown yet |
| Rhythm Multi Bariatric | Alternating pressure, true low air loss, pulsation | Medium to high risk at 42" or 48" width |
| Rhythm Turn | Continuous lateral rotation, true low air loss | Turning is required and manual repositioning is not realistic |
| DynaFlow | 3-in-1 alternating pressure, low air loss, pulsation | Existing pressure injury being treated |
| Duet | Alternating pressure, low air loss, pulsation and lateral rotation | The most demanding cases: turning plus active therapy in one surface |
The Ai1 has an integrated therapy pump holder and a hospital-grade auxiliary outlet, so a powered mattress system runs off the bed without a pump sitting on the floor or a cable across the room.
If you are not sure which, call us. Tell us whether there is existing skin breakdown, how often the person can be repositioned, and who is doing the repositioning. That answers it in about five minutes, and it is a worse thing to get wrong than the bed.
Is the Ai1 the Right Bed?
- The person is over 550 lbs. No. Look at a 1,000 lb capacity bariatric frame instead and call us. This is the one specification not worth stretching.
- They need more than 35" of width but not necessarily 48". Yes. Set it where they are and expand later if needed.
- They are tall as well as heavy. Yes. The 88" deck length is unusual and is the reason many people end up here.
- Weight has to be tracked and standing is not safe. Yes. The in-bed scale is the whole reason.
- Falls are the main worry. Yes. 10" deck plus a 3-zone exit alarm.
- Feet elevation or shock positioning has been recommended. Yes. 14° Trendelenburg and reverse.
- Doorways or a tight turn are the problem. Yes. It goes in at 35" wide and expands in the room.
- You need a wide bed and nothing else. Probably not. A fixed-width bariatric bed costs less and we will point you at one.
Delivery, Setup and Warranty
- Free threshold delivery brings the bed just inside your entrance or garage.
- In-home setup is available at checkout if you want it carried in, assembled, positioned and the packaging taken away. On a bed that expands and has a scale to calibrate, most families choose this.
- Warranty is one year on the bed covering mechanical and electrical components, ten years on the steel structure, and 90 days on wear parts such as DC batteries.
- Repairs and service must be done by Prius or an authorized party, and non-Prius replacement parts are not approved for use on the bed. We are an authorized dealer, so parts and service requests go through us.
Frequently Asked Questions
Is the Prius Ai1 a 600 lb bed or a 550 lb bed?
Both numbers are real and they mean different things. Prius gives a maximum patient weight of 550 lbs and a safe working load of 600 lbs, and the safe working load includes the mattress, the bedding and anything else on the bed. Listings that advertise "600 lb capacity" are quoting the safe working load as though it were the patient limit. For deciding whether the bed suits the person, use 550 lbs.
How wide does the Prius Ai1 get?
The deck expands from 35" to 42" to 48". It takes mattresses from 36" to 48" wide. The frame measures 39.7" wide overall at its base setting, which is what matters for getting it through a doorway.
How long does it get, and will it fit a tall person?
The deck extends from 80" to 84" to 88", suiting someone up to roughly 6'8". You will need a mattress to match the length. We supply bolster extenders that add 4", 6" or 8".
How low does it go?
10 inches at the deck, rising to 31 inches. Add your mattress height for the actual sleep surface, so a 6" mattress gives roughly 16" to 37".
Does it really weigh the patient?
Yes, there is a scale built into the bed, and it records weight change as well as weight. Prius does not publish an accuracy tolerance in the manual, so if a care plan depends on a specific tolerance, ask us and we will get it from Prius before you buy.
Can it be used at home, or is it only for hospitals?
Families use it at home and we deliver and set it up in homes. It is worth knowing that Prius designates the Ai1 for professional healthcare environments in its manual. It has nurse call wiring and a hospital-grade auxiliary outlet. You are getting a genuine medsurg bed rather than a homecare bed dressed up as one. If anyone in the household is uneasy operating a bed of this class, say so when you call and we will talk through the lockouts and the controls.
What happens in a power cut?
An on-board backup battery takes over automatically, and there is a one-push CPR release that flattens the bed. The battery is a wear part, covered for 90 days.
Why does the bed stop moving sometimes?
Two reasons, both deliberate. Safety Stop halts the bed if it detects something underneath it as it lowers. And the motors run on a duty cycle of two minutes on, eighteen minutes off, so continuous repositioning over several minutes will pause. Neither is a fault.
Can I get it with a therapy mattress already matched?
Yes, and we would rather you did. The bed has an integrated pump holder and a hospital-grade outlet for exactly that. Choose the mattress on the bed's page or call and we will match it to the skin risk.
Do you bill Medicare or insurance?
No. NewLeaf is private-pay. Bariatric beds and therapy mattresses can qualify as durable medical equipment when prescribed, so you may be able to seek reimbursement from your own insurer. Ask them before ordering, not after, and we will provide documentation of what you bought.
Talk to Someone Before You Order
NewLeaf Home Medical is a small, family-run business and an authorized Prius Healthcare dealer. We are always happy to help on the phone, any time. There is no call centre and no script. Tell us the person's weight and height, what the bedroom and doorway look like, who is helping them, and whether there is any skin breakdown. That is usually enough for us to tell you whether the Ai1 is right and which mattress belongs on it.
See the Prius Ai1, configure it and check current pricing →
Browse all Prius beds and mattress systems → · Compare the Ai1 against other home hospital bed brands →